shadowbreakre

I modeled and 3d printed each of the dream weapons. I then sanded them and painted with acrylics. https://youtube.com/shorts/BRWu4X80Kb4?si=pOOUCTmGrXSMEx-P You can get the files on my cults3d: https://cults3d.com/en/users/Breakrebox/3d-models

ooh! can't wait to see how the rest of this goes. did you vacuum form the visor?

“In your hand take this key. So long as you have the makings, then by simple act of taking, it’s wielder you shall one day be.” My 3D printed Wooden keyblade given to Ven by Terra. This was 3dModeled by me and printed with wood filament, sanded, and then stained. No acrylics or spay paints.

I have the full armor printed and I'm now starting to paint it. The helmet is pretty much done and I'm pretty much don with the helmet, I just need to do a few more things to it and dye the visor. I'm really loving how the helmet turned out so far.

My most detailed armor set, Terra's "Broken Will" from kingdom hearts. I created a damaged version of Terra's Lingering Will Armor inspired by Birth by Sleep cinematic trailer and I tried to stay accurate to a lot of the major damage his armor takes such as what's broken off on certain pieces as well as any significant gashes. I included a buck of the shattered visor however if you want the regular one you can get it from my undamaged version as it's the same scale. This one was a lot of fun to make as i rarely get to destroy my models. It surprisingly took less time to do than it was to make the original set. https://www.thingiverse.com/thing:5494459 everything was sculpted in zbrush. This took surprisingly quick to finish. I'm really happy with the way it turned out. I have about half the armor fully printed, smoothed, and ready to paint. I have also vacuum formed the visor and it it turned out great. I made videos of how i made everything. the next step is to finish printing everything and work on undersuit. For the undersuit I plan on taking some creative freedom and making look more like with foam rather than just a fabric. I'll go more into detail about what I'm intending once i start working on it. \ Part 1 https://youtube.com/shorts/KWqKIrAWhOo?feature=share Part 2 https://youtube.com/shorts/mMJ_odw7QTw?feature=share Part 3 https://youtube.com/shorts/07LzZFDWrCU?feature=share Part 4 https://youtube.com/shorts/X_qoEkJfaSc?feature=share Part 5 https://youtube.com/shorts/8A3e_dPE6J0?feature=share Part 6 https://youtube.com/shorts/_JGx9TenErk?feature=share

It's finally here!! My most requested Armor, Ventus's Keyblade Armor. May your heart be your guiding key. Helm sized for 23.5" head. left pieces can be mirror for right side. This now complete the set with my printable Terra and Aqua Armor's https://www.thingiverse.com/thing:5470645

Went to RTX Austin this weekend and got to wear my armor again. I also finished the Ends of the Earth keyblade. The even was So much fun. I got stuck in one place for close to an hour just getting pictures taken with me. I also got to take pictures with Blaine and Jack from Rooster Teeth. video-1656972910.mp4

Debut of my terra Cosplay at the atx 20th even. Didn’t win the cosplay comp but I still had a ton of fun and met some awesome people!!

Just a sneak peek of the armor before the Cosplay comp tomorrow

finally warmed up enough to start painting again, won’t be able to finish till tomorrow.

3/4th of the armor is printed, sanded, and ready to paint. Still have part of the legs left to make. hopefully of i can get the rest of this printed by Thursday then I'll be able to start on the keyblade. https://youtu.be/gKSdNB87gVU FinalVideo_1646714223.598978.mov 3/4th of the armor is printed, sanded, and ready to paint. Still have part of the legs left to make. hopefully of i can get the rest of this printed by Thursday then I'll be able to start on the keyblade. https://youtu.be/gKSdNB87gVU 3/4th of the armor is printed, sanded, and ready to paint. Still have part of the legs left to make. hopefully of i can get the rest of this printed by Thursday then I'll be able to start on the keyblade. https://youtu.be/gKSdNB87gVU

Making Terra's armor for a 20th anniversary convention in march. I've got a bout half of the pieces printed with about third completely finished. I vacuum formed the visor and ready to dye it. I'm still waiting on a custom ordered undersuit, just hoping it's ready in time. I'm also having issues with my 3d printers so I'm hoping can get those issues resolved so i can print the rest of the pieces. This is the progress I have so far. if anyone want to print their ow they can get my files below. I also made Aqua's armor and after MANY requests, I'm also working on Ventus. https://www.thingiverse.com/thing:4882089